4CFM Two Stage Vacuum Pump

BVV-Marosi Designs LLC.

$465.80 
SKU: BVV4D

This is the BVV™ V4D 4CFM Two Stage Vacuum Pump used for Lathe Vacuum chucking, Wood Stabilizing and botanical extraction.

Key Feature 

  • Internal Check Valve
  • Oil Mist Filter Cap
  • Larger Oil Reservoir for longer oil life
  • Lightweight
  • Rubber Feet for noise dampening
  • Reliable, economical, and efficient

Models

BVV4D

Stage

2

Ultimate Vacuum (Microns)

15

Refrigerant Classes

A1 Non-Toxic, Non Flammable

Dimensions (in)

12.4 x 4.8 x 10.16

Weight (lbs)

19.4

Free Air Displacement

4.3 CFM

Motor Size (HP) RPM

1 HP 3440 RPM

Oil Capacity

10oz / 300ml

Voltage

110V 60 Hz

Power Cord

Hard Wired 3m / 9.8' Power Cord

Power Switch

Standard On / Off

Operating Temperature Range

32F to 125 F (0C to 52C)

Gas Ballast Valve

Yes

Intake Fittings

Stainless Steel Inlet Fitting with 1/4" SAE & 3/8" JIC Male Ports

 

  • If the consumer is using the pump for prolonged periods of time exceeding 5 minutes we require that a cold trap is used or the pump warranty is void.

  • These stabilization resins have the ability to break down the internal components of the pump that are plastic resulting in a seized motor voiding all warranties.

  • When evacuation exceeds 5 minutes these solvents begin to vaporize and then re-condense in the vacuum pump reservoir. Once enough solvent re-condenses in the pump displacing the oil the plastic internal components may begin to warp, melt or seize. The use of a cold trap will condense the vapors prior to making their way to the vacuum pump preventing pump damage due to excessive use. Furthermore, Minwax Wood Hardener™ is not to be used with any vacuum pumps, EVER. (A seized motor will result within the first use.)

  • To prevent these issues from happening to your process, change the Oil after each vacuum pump use, Even if the use time is only 5min.